TLC All Fuel Chimney System
Model TLC All-Fuel Chimney offers current technology in factory-built chimney design by providing superior performance, durability and safety.
- Embossed Coupler – Prevents moisture penetration
- 304 Stainless Steel Inner Liner – High grade material heats up quickly to enhance draft
- 304 Stainless Steel Outer Casing - Premium material prevents corrosion
- Mineral Wool Insulation - Augered in for better insulating value to keep outside temperatures low for safety and inside temperatures high for performance
- Premium Fiber Insulation – 100% mineral wool (no chlorides)
- Twist-Lock connection – Easy assembly
Enhanced Features
Model TLC is extremely corrosion-resistant. Both the inner liner and outer casings are constructed of 304 stainless steel. Embossed couplers do not allow moisture to penetrate the chimney’s outer wall. Sections simply twist-lock together and are secured with Locking Bands. The Model TLC product line features deluxe chimney support components that will enhance any installation. Black trims are used to embellish the chimney support component parts that may be installed inside the home.
Supports
All Model TLC supports are designed to carry four times the UL-listed weight of the listed height.
Construction
| Sizes: | 5" to 14" |
| Inner Liner (Flue): | Type 304 Series Stainless Steel; 0.016" thickness |
| Outer Casing: | Type 304 Stainless Steel; 0.015" thickness |
| Insulation: | The 1" space between the inner/outerwalls is packed with mineral wool fiber insulation to provide superior insulating qualities in a slim-line design. |
| Airspace Clearance to Combustibles: | 2" |
Certification & Applications
Model TLC is safety-tested and listed to applicable UL safety standards for chimneys serving solid-fuel and liquid-fuel appliances. This includes UL 103.
This chimney system is designed for use on appliances that use solid, liquid or gas fuels under natural draft conditions.
Allowable flue gas temperatures are:
| Type | HT | Non-HT |
|---|---|---|
| Size | 5"-8" | 10"-14" |
| Maximum Continuous | 1000°F | 1000°F |
| Brief Forced Firing (1 hr.) | 1400°F | 1400°F |
| Creosote Burn-Out (10 min.) | 2100°F | 1700°F |
- Model TLC All-Fuel Chimney 5”-8” Installation Instructions
- Model TLC 10”-14” Installation Instructions
- Model TLC Ceiling Support & Connections Installation Instructions
One-Story Installation
Multi-Story Installation
Wall Support Installation
Cathedral Support Installation
Height Requirements
The chimney must extend at least three feet above the highest point where it passes through the roof surface and at least two feet higher than any part of the building within a horizontal distance of ten feet.
- Slim, advanced design allows for installation between 16" centers and still provides 2" clearance from combustible material.
- Secure twist-lock design couples chimney sections together with just a 1/8 turn. Locking bands secure joints.
- Includes locking band.
- 5"-8" sections overlap by 1 1/8", 10"-14" sections overlap by 1 1/4".
- Chimneys are sized according to the inner diameter and are available in 5" through 14".
- The outside diameter is 2" larger than the inside diameter.
The insulated elbow is used when offset is required.
Permits typical 2" airspace clearance to combustibles.
The insulated chimney tee may be used for through-the-wall installation, using a wall support.
Used where the chimney passes through a roof with a pitch of 6/12 to 12/12.
Used where the chimney passes through a roof with a pitch of Flat to 6/12.
0/12 to 2/12 pitch
- Used in conjunction with a standard TLC Flashing
- Used to seal the opening when penetrating a corrugated metal roof
- Fits all available sizes (5" to 14")
- This kit fits 5", 6", 7" and 8" chimneys.
- Used where the chimney passes through a corrugated roof.
- Rubber boot flashing fits roof pitches up to 6/12
Used in conjunction with roof flashing to keep precipitation out.
- Used to seal storm collar to chimney length above cone of flashing.
- 3-ounce tube.
Covers 2-inch space around chimney for attractive finish
To be used with specifically listed zero-clearance fireplaces for direct connection of all-fuel chimney
Provides lateral support for the chimney when installed along vertical walls
Locking bands are used at all joints for safety and stability
Used when more than 5 feet of chimney extends from the roof
Insulation for use with Attic Insulation Shield, Wall Thimble and Cathedral Ceiling Support Box
Used where the chimney passes through a soffit to provide a finished appearance
For quick and easy transition from black stovepipe to factory-built chimney
Used on wall support installations when passing through a noncombustible wall
Provides lateral support for the chimney when installed adjacent to a wall
Provides protection against the elements
For use with 6" to 14" caps
Required where an enclosed chimney passes from a lower living space into an upper living space
Designed to keep insulation away from the chimney and to maintain the mandatory 2-inch clearance to combustibles
The rafter radiation shield must be installed immediately below the roof flashing, inside any enclosure
Used in a wall support installation
Used to support the chimney on a through-the-wall installation
For use in flat ceiling support installations
Used in pitched ceiling support installations
Used with the Wall Support (TLCAWS) and L-Bracket
Used as supplementary support when chimney system height exceeds maximum height allowed by wall support
The roof support may be used on a roof and adjusts to any roof pitch