Insulated 15°, 30° and 45° Elbow Kits
The insulated elbow is used when offset is required.
Locking bands must be used on all elbows.
A maximum of 6 feet is allowable between offsets.
Elbow is fully insulated and can be used with the same 2-inch
clearance as chimney lengths.
Elbow support must be used with all offset installations and will
support 15 feet of chimney.
Elbows do not have twist-locking ridges, so they can be rotated
to attain optimum positioning offset and allow chimney to return to
correct vertical alignment prior to installing locking bands.
May not be used outdoors.
10", 12" and 14" sizes available in 15° and 30° elbow kits only.
45° elbows may be used only with oil or gas appliances.
Elbow kits include: 2 elbows (Exception: 12" and 14" sizes
include four 15° elbows assembled into two 30° elbows)- 4 locking bands (Exception: 10", 12" and 14" sizes include two locking bands)
- 1 elbow support
- All hardware
