Online Catalogs
Site Search:
Vent
Hart & Cooley Product Registration
Hart & Cooley Distributor Locator
Downlaod Literature
 
Home > Skip Navigation LinksProducts > Vent > B-Vent > Hart & Cooley

Product Information

Rep Locator
Hart & Cooley

Hart & Cooley

Hart & Cooley Type B Gas Vent is a complete all-metal, double -wall gas venting system. 

It is approved for such residential and commercial applications as water heaters, boilers, furnaces and space or wall heater venting. Tested and Listed to UL-441

Note:
Section 1 pertains to Type B Gas Vent and Section 2 pertains toChimney. The guide also contains information on flexible liner sizing tablesfor oil.

Document Type Document Name Description File Size
Catalog - Hart & Cooley Type B Gas Vent System Safety of the Hart & Cooley® system is assured by the double-wall, air-insulated design and locking joints. Type B Gas Vent is designed for negative pressure applications and flue gas temperatures not exceeding 550° F for Category I appliances.
1.33 MB
Hart & Cooley Type B Gas Vent & All-Fuel Chimney Sizing Guide This Guide is a compilation of the system design and application procedures for all Hart & Cooley® Gas Venting and Chimney products. It also includes flexible stainless liner sizing tables for oil.
1.02 MB
 
Document Type Document Name Description File Size
14" to 30" Instructions Installation Instructions Round Type B Gas Vent Model E - Sizes 3" through 6" Model R - Sizes 7" through 30"
946.00 KB
3"-12" in Instructions Installation Instructions Type B Gas Vent - 3" to 12" Diameter
939.94 KB
B-Vent Offset Chart B-Vent 45 degree Offset Submittal Drawing.
62.70 KB
Double Wall Gas Vent Connector Instructions Model DFC - Double Wall Gas Vent Connector Installation Instructions
154.45 KB
Oval Vent Instructions Hart & Cooley Oval Type B and BW Gas Vent Installation Instructions
227.84 KB
Single Wall Gas Vent Connector Instructions Model SFC - Single Wall Gas Vent Connector Installation Instructions
154.60 KB
Document Type Document Name Description File Size
Frequently Asked Questions_B Vent FAQ Type B Gas Vent
15.06 KB
Order Form - HC Gas Vent Chimney Systems Order Form - HC Gas Vent Chimney Systems
197.00 KB
Document Type Document Name Description File Size
Adjustable Flange SD-3501
47.07 KB
Adjustable Flashing SD-3502
47.49 KB
BH 4inch to 6inch Submittal drawing for Chimney Housing (SD-3136)
55.82 KB
C 14inch to 30inch Submittal drawing for Snap Lock Cap - Model C (SD-3145)
56.83 KB
CU 14inch to 30inch Submittal drawing for Universal Cap - Model CU (SD-3144)
56.48 KB
Double Wall Flexible Connector Submittal drawing for Double Wall Flexible Connector (SD-3450)
181.37 KB
FT 26inch to 30inch Submittal drawing for Tall Cone Flashing - Model FT (SD-3143)
49.43 KB
RAA 3inch to 8inch Submittal drawing for Adapter (SD-3127)
66.70 KB
RDH 3inch to 12inch Submittal drawing for Draft Hood Connector (SD-3114)
53.93 KB
RE-45 Submittal drawing for 45 degree Elbow.
58.19 KB
REA-45 Submittal drawing for 45 degree Adjustable Elbow (SD-3105)
63.56 KB
REA-60 Submittal drawing for 60 degree Adjustable Elbow (SD-3131)
60.73 KB
REA-90 Submittal drawing for 90 degree Adjustable Elbow (SD-3104)
63.61 KB
RF 3inch to 24inch Submittal drawing for Adjustable Flashing (SD-3116)
61.26 KB
RF 3inch to 24inch Submittal drawing for Adjustable Flashing (SD-3116)
61.26 KB
RFA 12inch Submittal drawing for Adjustable Flange (SD-3501)
49.61 KB
RFA 14inch Submittal drawing for Adjustable Flashing (SD-3502)
47.49 KB
RFA 3inch to 8inch Submittal drawing for Adjustable Flashing (SD-3117)
36.01 KB
RFC 4inch only Submittal drawing for Firestop (SD-3123)
48.10 KB
RFO 3inch to 8inch Submittal drawing for Special Flashing (SD-3133)
37.63 KB
RGS 3inch to 6inch Submittal drawing for Firestop and Support Assembly (SD-3139)
76.44 KB
RHW 3inch to 6inch Submittal drawing for High Wind Cap (SD-3130)
54.35 KB
RIXU 14inch to 24inch Submittal drawing for Universal Increaser (SD-3141)
51.85 KB
RM 7inch to 12inch Submittal drawing for Cap (SD-3112)
53.89 KB
RN 14inch to 22inch Submittal drawing for Increaser (SD-3109)
55.98 KB
RN 3inch to 12inch Submittal drawing for Increaser (SD-3108)
68.23 KB
RP 14inch to 30inch Submittal drawing for Round Pipe - Model R (SD-3101)
58.59 KB
RP 3inch to 12inch Submittal drawing for Round Pipe (SD-3100)
75.82 KB
RPA 14inch to 30 inch Submittal drawing for Adjustable Length (SD-3103)
55.96 KB
RPA 3inch to 12inch Submittal drawing for Adjustable Length (SD-3102)
64.34 KB
RPC 3inch to 8inch Submittal drawing for Pipe Collar (SD-3122)
37.27 KB
RRA 3inch to 6inch Submittal drawing for Adapter (SD-3126)
61.05 KB
RS 3inch to 6inch Submittal drawing for Storm Collar (SD-3119)
33.61 KB
RS 7inch - 12inch Submittal drawing for Storm Collar (SD-3120)
48.99 KB
RSA 3inch to 24inch Submittal drawing for Support Assembly (SD-3124)
60.02 KB
RT 14inch to 24inch Submittal drawing for Tee (SD-3111)
53.91 KB
RT 3inch to 12inch Submittal drawing for Tee (SD-3110)
63.21 KB
RTC 14inch to 30inch Submittal drawing for Tee Cap (SD-3140)
48.83 KB
RTC 3inch to 12inch Submittal drawing for Tee Cap (SD-3107)
48.05 KB
RTF 3inch to 24inch Submittal drawing for Tall Cone Flashing (SD-3118)
42.88 KB
RUA 14inch to 24inch Submittal drawing for Universal Male Adapter (SD-3148)
49.21 KB
RWB 3inch to 7inch Submittal drawing for Wall Bracket (SD-3128)
34.48 KB
RWB 8inch to 14inch Submittal drawing for Wall Bracket (SD-3129)
33.66 KB
RWT 3inch to 6inch Submittal drawing for Wall Thimble (SD-3121)
53.68 KB
RYF Submittal drawing for Fixed Wye (SD-3134)
64.72 KB
SC 14inch to 30inch Submittal drawing for Adjustable Storm Collar (SD-3146)
55.95 KB
Single Wall Flexible Connector Submittal drawing for Single Wall Flex Connector (SD-3430 & SD-3435)
167.17 KB
SP 14inch to 30inch Submittal drawing for Support Plate (SD-3147)
140.35 KB
 

The Hart & Cooley Inc., Network:
  • Selkirk
  • Selkirk
  • American Metal
  • Commerical Products Group
  • Smart air & energy